# Features

Calcwright is a worksheet in the style of Mathcad. Math and text go anywhere on the page, and the math is worked out top to bottom, then left to right, by an engine on a thread of its own.

The worksheet

## Math on paper, typeset as you type.

Click the page to put the crosshair there and type. `:` becomes ≔ and `*` becomes · . Fractions stack, exponents rise and roots go under a radical, as in Mathcad. Text regions explain the calculation and print with it.

- Letter, Legal, Tabloid, A4 or A3, plain or engineering paper
- The pad's title block: project, job, sheet, by, checked
- Areas that collapse and lock, and references to other worksheets
- Print, or save as PDF, with vector math and plots
- Math too wide for the page fitted to it: long vectors shortened, long equations broken

![A worksheet on green engineering paper with a title block, definitions with units and a beam diagram](https://calcwright.app/images/hero-crop.webp)

Units and design checks

## Every value carries its units.

Type `12kN/m`, `3ft` or `30deg`. Units convert and cancel, and a wrong one is an error. Results show in the unit that suits their size, 250 MPa or 15.1 mm, or in the unit you type after Tab. Switch the sheet to US customary units and every result follows.

- `check(σ<=0.9*Fy)` shows OK or NG, with its ratio
- Show the working: the formula, the values in place, the answer
- Traditional notation, as a textbook or a report sets it
- Your own units and unit sets, saved with the sheet

![The working of a beam's moment and stress shown in full, and two design checks marked OK with their ratios](https://calcwright.app/images/checks-crop.webp)

Plots and math

## Plots, matrices, calculus and symbolic math.

Type `@` for a plot. Ranges, vectors and matrices with units in each element; integrals, derivatives, sums and roots; solve blocks for several equations in several unknowns; and the symbolic arrow, → , for exact answers.

- Programs with `if`, `for` and `while`, as Mathcad writes them
- Statistics, curve fitting, interpolation and lookup
- Tables, typed or pasted from a spreadsheet or a CSV file
- Complex numbers, units and all

![The Plots example: sin(t) and cos(t)/2 plotted over t from −10 to 10 with a legend](https://calcwright.app/images/plots-crop.webp)

Structural

## Steel sections, beams, frames and trusses.

`S1:section("W310x39")` brings in a rolled shape's properties by name. Insert a beam diagram, or a frame or truss diagram, and it is drawn to scale and solved by the direct stiffness method, with reactions, shear, moment and the deflected shape. Their results are names the math below can use.

- AISC W, C and HSS in inches and millimeters (Shapes Database v16.0)
- CSA W, C and HSS by CISC's names
- Size it: the lightest shape for which every check is OK
- Drag a support, a load or a node, and the sheet follows

![A steel beam chosen by name from the CSA tables, its properties shown, and class of section checks marked OK](https://calcwright.app/images/steel-crop.webp)

Drawings

## Drawings that follow the math.

A drawing is lines, arcs, text and dimensions whose every coordinate is an expression read against the sheet. A section b wide redraws when b changes, and its labels show the values. Insert → Figure has every drawing from the examples ready to drop in.

- To scale, in the unit you choose
- Symbol libraries whose parts are made from values
- SVG and DXF in, SVG and DXF out, through your AI

![A crane boom and its free-body diagram drawn from the worksheet's values, with a title block](https://calcwright.app/images/drawing-crop.webp)

For teachers

## One question, other numbers for each student.

Mark the givens that vary, and the values they take. Mark the answers to leave off students' copies. File → Versions draws a set, prints students' copies with a name line, worked copies and the answer key, and exports a quiz for Moodle or Canvas. It works without any AI.

- Any version on the paper in one click, worked out, with ‹ and › to step through the set
- Values may depend on each other, with a rule after `where`
- Moodle XML or Canvas QTI, each student their own numbers

![The Versions of a question example: givens marked with ± in the margin, answers marked ans, and 3 givens vary in the status bar](https://calcwright.app/images/versions-crop.webp)

Bring your own AI

## Your AI, working the sheet in front of you.

Calcwright never calls an AI service itself. It is an MCP server on your computer, and the AI app you already use connects to it. Your AI reads the worksheet, adds and changes regions, sees its own drawings as pictures to correct them, and sizes steel, all while you watch.

- Prompts for drawing a problem, a free-body diagram, versions and checking
- What your AI changed is marked until you have looked
- One request is one step of Undo
- Only this computer can connect, with a token

[Connect your AI](https://calcwright.app/docs/#connect-your-ai)

![Regions added over MCP with violet margin bars, and Your AI changed 10 regions in the status bar with Review, Undo all and Done](https://calcwright.app/images/ai-crop.webp)

## What your AI can do

The tools your AI sees, from the app's own list.

| Tool | Does |
| --- | --- |
| `sheet_read` | The worksheet whole: every region in reading order, its text and what it shows |
| `sheet_selection` | What you have chosen on the page or in a drawing |
| `sheet_add`, `sheet_update`, `sheet_delete`, `sheet_undo` | Add text, math, plots, beam and frame diagrams, tables and drawings; change, remove and take back |
| `sheet_evaluate` | Work an expression out against the worksheet without adding it |
| `sheet_versions`, `sheet_export_quiz` | Versions of a question, and a quiz for Moodle or Canvas |
| `sheet_show_version`, `sheet_show_worksheet` | Show one version on your paper to look at together, and go back |
| `sheet_size_shape` | The lightest steel shapes for which every check is OK |
| `drawing_view`, `region_view` | A drawing, beam, frame or plot as a picture, so your AI sees what it drew |
| `drawing_edit`, `drawing_add_symbols` | Change a drawing in place; place symbols made from values |
| `drawing_import_svg`, `drawing_import_dxf`, `drawing_export` | SVG and DXF in and out |
| `sheet_save`, `sheet_open` | Save and open `.calcwright` files on disk; replacing another file asks you first |

---

From https://calcwright.app/features/
